Fuji Cross Stack Laser Gas Analyzer
Dual Beam Version
ZSS-D cross stack laser gas analyzer provides continuous measurement of CO and O2 contained in flue gas in various plants.
Because ZSS-D is installed directly on the stack or the pipe through which the target gas passes, sample gas conditioning is not required. Being highly tolerant to dust, ZSS-S can be installed on the upstream of a bug filter where the gas sampling usually is difficult. ZSS-D is designed for both environmental monitoring and process monitoring.
FEATURES
- Double-beam laser for two component analysis of CO and O2
- Low maintenance and operating cost with no gas sampling device and few parts to be replaced
- Superior long term stability
- Fast response within 4 seconds – suited to combustible gas monitoring and control in converter furnaces
- Tolerant to high temperature and high dust concentration
- Low power consumption
- Compliant with RoHS directive (2011/65/EU)
TECHNICAL SPECIFICATIONS
- Measurement principle: Non-dispersive infrared (NDIR)
- Measuring method: Cross-stack system
- Optical path: 0.5 to 5 m (1.64 to 16.40 ft).
- Backlit LCD display
APPLICATION FLEXIBILITY
- Optical path greater than 5 m (16.40 ft)
- Cable between receiver unit and control unit for calibration
- Cable between receiver unit and transmitter unit for calibration
- Calibration gas cell (CO+O2)
- Optical axis adjusting tool
- BNC cable for optical axis adjustment
- Check cell
- Filter regulator
- Mist separator
- R¼ cap nut for mist separation
- Flow meters 20-100 l/min, 4-50 l/min or 30-300 l/min
- Air-set box 20-100 l/min, 4-50 l/min or 30-300 l/min
- Air purge mechanism 20-100 l/min, 4-50 l/min or 30-300 l/min
- Spare parts for one year operation
DOCUMENTATION
